TP62- Christmas Transfer

Ready to take your clay game to the next level?! Our Christmas transfer paper for clay is here to do just that! They are laser printed on water-soluble card stock. Included with each transfer paper purchase is a step by step instruction sheet. The image of the transfer sheet is placed on your clay, while the paper washes away.

These are made specifically for polymer clay.

You must choose the number of pieces of transfer paper you would like from the drop down. NOTE: Each piece of transfer paper is roughly 4x5 inches

/INSTRUCTIONS

•Use white or very light colored clay; adhere your clay slab to a tiled surface.

•Place your transfer paper with the bright/colored side down on your clay. It is best to cut your transfer paper to match the size of your clay. We also find it works better when you leave a little edge of raw clay around the perimeter of your transfer paper- this helps the sides of your transfer paper really stick and prevent water from flowing underneath the paper.

•Bray your paper to the clay using a roller. Gently press around the perimeter of your paper to ensure the paper is well adhered on all sides.

•Run your slab under low pressure running water.

•As the water is running, gently rub away the paper with your fingers. You do want to be careful to not rub too hard, or you may smear the ink.

•Let airdry for 10 minutes before cutting into your clay. Bake as usual and seal with your choice of varnish or resin.